Hay Sampling Plan: Obtaining a Forage Test That Represents the Stack
By Agricultural Website Network Editorial Team
A forage test is only as useful as the hay sample delivered to the laboratory. A fistful collected from the greenest bale in the barn will produce a convincing laboratory number and a misleading feeding decision. Forage testing begins with a sampling plan that treats each reasonably uniform lot separately.
Divide hay into meaningful lots
Group bales by field, cutting date, forage species, harvest maturity, and storage conditions. If rain fell between two days of baling, or one stack was stored outdoors and another under cover, those may deserve separate samples. Label each lot before drilling cores. A lab result cannot tell you which stack it represents if the sample bag only says "good hay."
Forage quality changes with maturity, species, curing, and weathering. The Penn State Extension forage resources explain forage management and quality considerations. Use a laboratory accredited or otherwise qualified for the analyses your nutritionist requests, and follow its current handling instructions. A hay probe and clean sample bag are far more reliable than tearing a single attractive handful from one bale.
Collect cores without choosing favorites
Use appropriate equipment
Use a sharp, clean hay-coring probe of suitable diameter, attached to a drill if recommended by its manufacturer. Sample from the bale end in a manner appropriate to the bale type and construction. Keep foreign material, baler twine, soil, and loose material out of the sample. Never reach under a suspended bale or climb an unstable stack to reach an inaccessible bale. Move bales with proper equipment before sampling dangerous locations.
Spread sampling across the lot
Select bales from different accessible positions, not just the front row. Follow the lab's recommended number of cores for the lot; larger or more variable groups may require more sampling. Combine the cores in a clean container, mix without grinding them into dust, and place the composite in a properly labeled bag. If the sample does not represent typical bales, the reported protein and fiber values will not represent the feed you actually own.
University Extension programs, including University of Wisconsin Division of Extension, provide forage quality education and sample interpretation support. Ask the laboratory whether it prefers refrigerated, promptly shipped, or otherwise protected samples for the intended analyses, especially if testing wet hay or haylage.
Request the tests that answer feeding questions
Dry matter and crude protein are useful starting measurements. Depending on livestock species and forage type, ask about neutral detergent fiber, acid detergent fiber, digestibility estimates, minerals, and nitrate testing when relevant. For sorghum-family crops after drought or frost, discuss potential toxicological concerns with a veterinarian or Extension specialist and order the appropriate laboratory test. Do not assume a standard feed-quality panel detects every hazard.
Record whether results are on a dry-matter or as-fed basis. A ration formulated with dry-matter percentages cannot be compared directly with an as-fed delivery weight without accounting for moisture. A single percentage without its reporting basis is an invitation to buy the wrong amount of supplement.
Worked example: two apparently identical stacks
Illustrative example: A cow-calf operation has 80 early-cut grass bales under a roof and 120 later-cut bales stored outside. The operator assigns two lot numbers, samples each separately, and obtains two lab reports. The nutrition adviser uses those reports, cattle body condition and stage of production to assign feed. The grower does not blend the samples simply because both stacks are brown from the road.
Turn results into a feeding decision
Store the laboratory report with lot ID, bales remaining, storage location, and dates fed. Balance rations for the relevant animal class with a nutrition professional, and re-sample when hay is visibly damaged, when substantial lots are mixed, or when feed characteristics change. Extension resources such as the USDA National Agricultural Library can help locate additional forage and animal-nutrition references. The best hay test is not the one with the prettiest number; it is the one that represents the feed in the bunk.